Harris Constellation - Page 77

Harris Corporation Constellation™
Detailed Terminal Test 3-29
INSTALLATION
AND
COMMISSIONING
Figure 3-19: Receiver Assembly, front view
Note: To prevent damage
to the connectors, do not
exceed 8 to 9 in-pounds
of torque.
RF IN (from
ACU)
IF OUT (to
Modem)
Thumb screw
REF MON
Reference frequency
test point (100 MHz)
Test points for
aligning the
antenna
(See
page 3-35. )
FAULT (red
LED)
ON LINE
(green LED)
RSL
GND
Handle
LO MON
LO synthesizer test
point
(2.060 to 2.160 GHz)
(For factory use only)