Honeywell HPM - Three 15-Slot Card Files with Power Distribution Assemblies; Power Distribution Assemblies for Redundant Cabling; Figure 54 Three 15-Slot Card Files with Power Distribution Assemblies

2 Equipment Description
2.22 Card File Power Cabling
124 HPM High-Performance Process Manager Service R688
Honeywell December 2020
Three 15-Slot Card Files with Power Distribution Assemblies
The following figure is an illustration of power cabling for a typical High-Performance Process Manager
configuration of three 15-Slot card files and two Power Distribution assemblies.
Figure 54 Three 15-Slot Card Files with Power Distribution Assemblies
Power Distribution Assemblies for redundant cabling
Early production Standard Power Systems and AC Only Power Systems are limited to eight power
output connectors. The following figure illustrates how power is distributed when the number of
available connectors does not meet the total need for redundant cabling.
32776
Digital Input
Power Distribution
Assembly
Power System
Galvanic Isolation
Power Distribution
Assembly
Card File 1
Card File 2
Card File 3