Honeywell HPM User Manual

3 UCN Status Displays
3.6 NIM Detail Status Displays
R688 HPM High-Performance Process Manager Service 227
December 2020 Honeywell
3.6 NIM Detail Status Displays
Selection procedure
The NIM Detail Status displays consist of two displays, the NIM Driver Configuration display and the
NIM Local UCN Statistics display. The initial NIM Detail Status display, which is the NIM Driver
Configuration display, is selected by invoking the UCN Status display, choosing the NIM of interest on
the display grid, and then selecting the DETAIL STATUS target.
The NIM Driver Configuration display can also be invoked by selecting the NIM DVR CONFIG target
on the NIM Local UCN Statistics display.
NIM Driver Configuration display
The NIM Driver Configuration display is shown in the following figure.
Figure 117 NIM Driver Configuration Display

Honeywell HPM Specifications

General

Brand	Honeywell
Model	HPM
Category	Network Hardware
Language	English