5 UCN Exerciser
5.5 Test Operation
R688 HPM High-Performance Process Manager Service 395
December 2020 Honeywell
UCN Exerciser Help display
Figure 195 UCN Exerciser Help Display
Connection Test Summary display – Page 1
Each box in the grid on the UCN Exerciser Overview is a target that when chosen and followed by
selection of the CONNECT TEST SUMM target, invokes Page 1 of the Connection Test Summary
display for the NIM node.
The display is shown in the following figure. Nodes 1 through 64 are represented.
Figure 196 Connection Test Summary Display – Page 1
To Next Page
Loading...
Need help?
General
