Honeywell HPM User Manual

3 UCN Status Displays
3.7 HPMM Detail Status Displays
242 HPM High-Performance Process Manager Service R688
Honeywell December 2020
Version and revision data
The information is derived from the hardware boards, firmware ROMs, and the personality data
contained in the software. The information is tabular and the column headers are defined in the following
table.
Table 47 HPMM Version/Revision Display
Term
Description
OVERALL SW
VERS REV
Uniquely ties the Communications and Control
component software version and revision together.
H/W
The hardware version/revision of the HPMM cards and
the HPM UCN Interface module
F/W
The firmware version/revision for the Communications
and Control processors
IDENTITY
The NAME, VERSion, and REVision of the software
personalities that are currently hosted by the
Communications, Control, and I/O Link processors.
CREATION DATE
The DAY, MONTH, and YEAR of the creation of the
software personalities that are currently hosted by the
Communications, Control, and I/O Link processors.
LOADED PERSONALITY
The present state of the Communications and Control
processor personalities
NODE TYPE
The type of node, either HPM or EHPM.
MEDIA TYPE
The type of media, either TBC for an HPM, or FTE for an
EHPM.

Honeywell HPM Specifications

General

Brand	Honeywell
Model	HPM
Category	Network Hardware
Language	English