3 UCN Status Displays
3.7 HPMM Detail Status Displays
R688 HPM High-Performance Process Manager Service 243
December 2020 Honeywell
HPMM Control Configuration Display
Selection of the CONTROL CONFIG target on the HPMM Detail Status display invokes the HPMM
Control Configuration display for the primary HPMM only. There are two displays associated with the
CONTROL CONFIG target.
HPMM Write Lockout Control Display
Initial selection of the CONTROL CONFIG target produces the HPMM Control Configuration display
shown in the following figure. The display has two main sections, Control Configuration and Schedule
Overrun Counters.
Figure 126 HPMM Write Lockout Control Display