Honeywell HPM

3 UCN Status Displays
3.5 HPM Status Displays
220 HPM High-Performance Process Manager Service R688
Honeywell December 2020
Figure 112 HPM Status Display – AUTO CHECKPT Target Selected
AUTO CHECKPT display targets
The command targets at the bottom of the display in Figure 112 perform the functions defined in the
following table.
Table 40 HPM Status Display – AUTO CHECKPT Target Selected
Target
Function
HPM CKPT ENABLE
Enables automatic Checkpointing of the HPM. The
command is executed by selecting the ENTER target.
HPM CKPT INHIBIT
Disables automatic Checkpointing of the HPM. The
command is executed by selecting the ENTER target.
CANCEL
Clears the HPM CKPT ENABLE, HPM CKPT INHIBIT, and
ENTER command targets.
ENTER
Executes the AUTO CHECKPT function command.