Honeywell touchpoint Pro User Manual

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
116
8. Maintenance
30°
Figure 8.1 Detaching a module
3. Fit a new module of the required type to the same slot on the Communication / Power Rail:
• Ensure that the module is the correct way up with the label towards you
• Hold the module at an angle with the plastic side (top) closest to the DIN rail
• Hook the plastic side on to the edge of the DIN rail

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English