203
Chapter 6, Call Processing Subsystem
CALL BIT Screen Message Field Descriptions
S
This field displays whether the serial number word is sent to the mobile station.
• Set to ‘1’ if the serial number word is sent.
• Set to ‘0’ if the serial number word is not sent.
E
This field displays the extended address word sent to the mobile.
• Set to ‘1’ if the extended address word is sent.
• Set to ‘0’ if the extended address word is not sent.
REGH
Registration field for home stations.
REGR
Registration field for roaming stations.
DTX
Discontinuous transmission field.
N-1
N is the number of paging channels in the system.
RCF
Read-control-filler field.
CPA
Combined paging/access field.
CMAX-1
CMAX is the number of access channels in the system.
To Next Page
Loading...
