534
S:\HP892XX\USRGUIDE\manual\testscrn.fb
Chapter 22, Tests Screen
TESTS (Save/Delete Procedure)
Select Procedure Location
This field is used the select where a new procedure will be saved, or the location
from which a procedure will be deleted. Procedures can be saved to, or deleted
from, disk, card, or RAM.
Operating Considerations
Procedure files contain a subset of the library file. This is where you save all of
your own frequency, parameter, test sequence, specification, and system
configuration information. A procedure file is not a directly-executable file for HP
11807 tests; it requires the code and library files to be present before running.
To save a file to an external disk drive, you must enter the drive’s HP-IB address
into the
External Disk Specification field on the TESTS (External
Devices) screen.
To Next Page
Loading...
