HP 8920A - Traffic Channel (Main) Number; Traffic Channel (Main) Power

431
Chapter 10, Signaling Encoder (AF Generator 2)
Nordic Mobile Telephone (NMT) Encoder
Traffic Channel (Main) Number
This field specifies the main traffic channel used for conversation after
communications have been established.
Valid Entry Range: 1 through 2023
NMT Frames Affected: 1bTA1, 1bTA2, 2b, 2b’, 2b’’, 3a1, 3a2, 3b, 3bTA2, 3d, 3dTA2,
4, 4TA2, 5a, 5b, 7, 10b, 10c, 11, 11a, 12, 13a, 13b, 14a, 14b, 16, 20, 21b, 21C, 22, 25,
26, 27, 28, 30.
Operating Considerations
This setting affects the RF generator and analyzer frequencies used when the
TCHAN TC1 and RCHAN TC1, or TCHAN TCM and RCHAN TCM,
programming commands is used.
See Also
Calling Channel Number
field description, on page 425
Traffic Channel (Main) Power
This field specifies the power of the main traffic channel. Each power setting
represents one of the four available levels allowed by the NMT standards.
Valid Entry Range: 0 through 3
NMT Frames Affected: 1bTA1, 1bTA2, 2b, 2b’, 2b’’, 3a1, 3a2, 3b, 3bTA2, 3d, 3dTA2,
4, 4TA2, 5a, 5b, 7, 10b, 10c, 11, 11a, 12, 13a, 13b, 14a, 14b, 16, 20, 21b, 21c, 22, 25,
26, 27, 28, 30.