377
Chapter 10, Signaling Encoder (AF Generator 2)
Digital Paging Encoder
Send
Selecting this field causes the entire data stream to be output (including the
preamble, address, and message).
Send Mode
This field selects the output format used when Send is selected to output a
sequence.
• Single outputs the entire sequence once.
• Burst outputs the sequence the number of times specified in the Bursts field.
• Cont causes the sequence to be output continuously until Stop is selected.
Standard
This field selects the digital paging standard for the pager being tested, POCSAG
or GSC (Golay Sequential Code).
Stop
Selecting this field stops the data stream being output.
To Next Page
Loading...
