HP 8920A - To Change a Value; To Make a One-Of-Many Choice; Numeric-Entry Field; One-Of-Many Field

45
Chapter 1, Get Started
Changing A Field’s Setting
One-of-Many Field
One-of-many fields display a list of choices when selected. See item 3 in figure 3
to see an example of a one-of many field.
To make a one-of-many choice
1. Position the cursor at the field.
2. Push the Cursor Control knob or the ENTER key to display the choices.
3. Move the cursor through the choices by turning the knob.
4. Push the Cursor Control knob or the ENTER key to make the choice.
The choice is immediately activated when selected.
The To Screen menu (see item 5 in figure 3 ) is a variation of the one-of-many
field.
Numeric-Entry Field
Numeric-entry fields contain values for settings like External Load Resistance and
RF Generator Frequency.See item 4 in
figure 3 to see an example of a numeric-
entry field.
To change a value
1. Position the cursor at the field.
2. Key in the desired number using the DATA keys.
3. Press ENTER to select the choice.
OR
1. Position the cursor at the field.
2. Push the Cursor Control knob to highlight the desired choice.
3. Turn the knob to increment or decrement the value.
4. Push the Cursor Control knob or the ENTER key to select the choice.