HP 8920A - DATA Keys

580
S:\HP892XX\USRGUIDE\manual\connkeys.fb
Chapter 24, Connector, Key, and Knob Descriptions
Key Descriptions
Key Descriptions
DATA Keys
The DATA keys have four main uses:
• The [0] to [9], [ . ], [+/-], and A to F keys are for entering and changing values.
• [ENTER] is used to select a field or screen, and to enter numbers when the unit-of-mea-
sure is not specified. This function is identical to pressing the cursor-control knob.
• [ON/OFF] is used to enable and disable measurements, and to turn numeric fields (such
as Amplitude) on and off.
• YES and NO are used to confirm selected operations before they are executed.
• EEX ([SHIFT], [+/-]) is used for entering numbers using scientific notation.
• The remaining keys in this area are for entering and changing the unit-of-measure for
measurements or field entries.
See Also
"Entering and Changing Numbers" on page 63.