HP 8920A - Proc Save;Delete Procedure

524
S:\HP892XX\USRGUIDE\manual\testscrn.fb
Chapter 22, Tests Screen
TESTS (Main Menu)
Proc Save/Delete Procedure
Selecting this field displays the TESTS (Save/Delete Procedure) screen.
Program
This field displays program information for the file chosen in the Select
Procedure Filename:
field.
Run Test
Selecting this field loads and runs the test chosen in the Select Procedure
Filename:
field.
Select Procedure Filename
This field is used to select the file you want to load from the location chosen in the
Select Procedure Location: field.
Select Procedure Location
This field is used the select the location of the procedure to load. Procedures can
be loaded from disk, card, ROM, or RAM.
Seqn Order of Tests
Selecting this field displays the TESTS (Order of Tests) screen.
Spec Pass/Fail Limits
Selecting this field displays the TESTS (Pass/Fail Limits) screen.