503
Chapter 20, Service Screen
Field Descriptions
RAM Initialize
Selecting this field clears all SAVE registers and test programs that may be in
RAM and resets all latches to their factory power-up configuration.
Operating Considerations
If you have saved one or more instrument setups using the SAVE function, using
this function will permanently remove them.
Value
This field displays and changes the value for the latch shown in the Latch field.
Voltage
This measurement field displays the voltage measurement for the circuit node
shown in the
Voltmeter Connection field.
Voltmeter Connection
This field selects the desired circuit node for voltage measurements. The reading
is displayed in the
Voltage measurement field.
To Next Page
Loading...
