440
S:\HP892XX\USRGUIDE\manual\ioscrn.fb
Chapter 12, I/O Configure Screen
Field Descriptions
Mode
This field sets the HP-IB operating mode. Talk&Lstn is used for “normal” HP-
IB operation.
Control is used to control external instruments using the Test Set.
This setting is retained when the instrument is turned off.
Parity
This field specifies the serial communication parity setting when using the rear-
panel serial port.
1
This setting is retained when the instrument is turned off.
1. Optional on some Test Set models.
Rcv Pace
The receive pace field is used when receiving serial data.
• Xon/Xoff lets the Test Set “talk” to the transmitting device to alter the rate of the data
being sent.
• None disables the Xon/Xoff function.
This setting is retained when the instrument is turned off.
To Next Page
Loading...
