474
S:\HP892XX\USRGUIDE\manual\rfanscrn.fb
Chapter 17, RF Analyzer Screen
Field Descriptions
Ext TX key
This field controls a switch at the MIC/ACC connector. Its intended use is to
“key” an external transmitter.
See Also
"MIC/ACC" on page 568
Distn
This field displays the percent of distortion for a 1 kHz signal tone.
FM Deviation
This measurement field displays the frequency deviation between the FM signal
and the carrier. The FM Deviation measurement field is only displayed when the
AF Anl In field is set to FM Demod or FM Mod.
See Also
AF Anl In
field description, on page 101
"Displaying Measurements" on page 57
To Next Page
Loading...
