552
S:\HP892XX\USRGUIDE\manual\txtscrn.fb
Chapter 23, TX Test Screen
Field Descriptions
AF Anl In
Audio Frequency Analyzer input selects the input for the analyzer. When selected,
this field displays a list of choices.
Signals can be analyzed from three different types of inputs:
• The output of the AM, FM, or SSB demodulators.
• The AUDIO IN, RADIO INTERFACE, MODULATION INPUT, MIC/ACC, and
AUDIO OUT connectors.
The signal present at the AM or FM modulators for the RF Generator.
Operating Considerations
Changing this field alters the upper AF measurement to the appropriate
measurement type.
This is a priority control field. Accessing the RX TEST or TX TEST screen
overrides any changes made to this field in other screens.
See Also
"Interaction Between Screens" on page 54
"Displaying Measurements" on page 57
To Next Page
Loading...
