HP ESG Series - Page 232

5-123
Hardkey and Softkey Reference
Preset
Frequency Modulation
Parameter Condition Parameter Condition
FM Path 1 FM Off
FM Deviation 1.0 kHz FM Deviation Increment Persistent State
FM Rate 400 Hz FM Rate Increment Persistent State
FM Source Internal FM Waveform Sine
FM Deviation Coupling Off
HP-IB/RS-232
Parameter Condition Parameter Condition
HP-IB Address Persistent State Remote Language SCPI
RS-232 Baud Rate Persistent State RS-232 Echo Persistent State
Transmit Pace Persistent State Receive Pace Persistent State
HP-IB/RS-232
Parameter Condition Parameter Condition
RTS Persistent State
Instrument Adjustments
Parameter Condition Parameter Condition
Step/Knob Ratio Persistent State Ref Osc Fine Persistent State
Ref Osc Coarse Persistent State
Instrument Info/Help Mode
Parameter Condition Parameter Condition
Help Mode (Single/Continuous) Persistent State Modulation Status Information On
LF Output
Parameter Condition Parameter Condition
LF Out Off LF Out Source IntMod
LF Out Amplitude 0.000 V LF Out Amplitude Increment Persistent State
LF Out Modulation Frequency 400 Hz LF Out Modulation Freq. Incr. Persistent State
LF Out Period
80
µs
LF Out Period Increment Persistent State
Table 5-4. Factory-Defined Preset Conditions