INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
146
appears on the screen (see Fig. 10.37). Please, repeat steps starting from
Step 5 again in order to reach acceptable result.
Note: Pressing “Yes” button (Fig. 10.37) allows saving the log file, which can be used to
debug errors. Log file contains information about commands that were sent by the INS
GUI and list of occurred errors. In case of errors, this file should be sent to the Inertial
Labs with brief description of user actions.
Fig. 10.36
Fig. 10.37
Step 9. If you want to finish the axes alignment procedure without
accepting result click “Exit” button on the calibration window (Fig. 10.35). As
a result calculated alignment parameters don’t get saved to the INS
nonvolatile memory.
Step 10. Click button to close the calibration window (Fig. 10.35).
To Next Page
Loading...