Inertial Labs INS-P User Manual

INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
47
To change COM port baud rate in the INS unit go to the “Devices Options”,
“IMU” tab (see Fig. 4.2) and choose necessary baud rate from the list as Fig.
4.19 shows.
After the baud rate choice click “OK” button to load changed parameters to
the INS nonvolatile memory. Then the information windows shown on the
Fig. 4.20 and Fig. 4.21 appear. Click “OK” button to close these windows.
Note COM port baud rate in the “Test Options” will change to chosen value,
too, to keep communication between the INS GUI software and INS unit.
Fig. 4.19

Inertial Labs INS-P Specifications

General

Brand	Inertial Labs
Model	INS-P
Category	Car Navigation system
Language	English