7 - 10
HAPSITE ER Operating Manual
4 Once the desired file is highlighted, click Select. Once Select is clicked, the
window will close. (See Figure 7-17.)
Figure 7-17 Selecting the pathway
The Data file increment digits is used to select the number of digits that are to be
appended to a data file. For example, if 2 is selected, the file name would read
Method_yearmonthday_01. If 3 is selected, the file name would read
Method_yearmonthday_001. (See Figure 7-18.) The data file increment digits can
also be selected in Method Editor. See section 10.11.1, Data File Information, on
page 10-60 for instructions.
Figure 7-18 Data file increment digits
To Next Page
Loading...
