10 - 59
HAPSITE ER Operating Manual
Selecting All will display the information contained in the Internal Standard
Calibration Report and the Analyte Standard Calibration Report. (See Figure
10-78.)
Figure 10-78 All
The Cal/Quant Report can be viewed by selecting Calibration Report from the
drop-down menu. See Figure 10-79. The Cal/Quant Report will display the same
information as a Quantitative Report. Refer to section 8.4, Reports, on page 8-5
for more details. In the top right corner, the peak search parameters are also
displayed. Refer to section 10.10.3, Peak Search, on page 10-44. (See Figure
10-79.)
Figure 10-79 Cal/Quant Report
To Next Page
Loading...
