3 - 27
HAPSITE ER Operating Manual
15 While maintaining steady pressure on the top elbow fitting, finger-tighten the
bottom nut of the concentrator until tight. (See Figure 3-49.)
Figure 3-49 Tightening the Top and Bottom Nut
16 While continuing to maintain steady pressure on the top elbow, finger-tighten
the top nut until tight.
Excessive force and/or tightening can cause the fragile
glass to break.
17 Using a 7/16 in. wrench, turn the bottom nut approximately 1/4 of a turn
clockwise until tight. (See Figure 3-50.)
Figure 3-50 Using Wrench to Tighten Bottom Nut
To Next Page
Loading...
