Chapter 5: Console Operation
Labels
Eclipse User Guide 2.0 201/ 526
Note that a mix bus may be patched to multiple destinations:
1. Press the SEL button on the output channel to cycle
through each patched output.
The output Label, system description and any output
processing parameters update accordingly:
On stereo outputs, you will see the output Label and
parameters for the left channel unless you use STEREO EDIT
mode, see Page 189
Note that on Aux channels, the name of the Personal Mix (e.g.
John) takes priority over the channel Label if a Personal Mix is
loaded. See Page 387 for details.
To Next Page
Loading...
