Chapter 8: Utilities & Preferences
Linking
Eclipse User Guide 2.0 415/ 526
Temporarily Cancelling a Link
If you need to adjust the relative balance between linked
channels, you can temporarily remove a channel from the link
group as follows:
1. Press and hold the SEL button on the channel you wish
to adjust.
2. Move the parameter – e.g. the fader.
This adjusts the fader level of the individual channel.
3. Release the SEL button, and move the fader.
All linked channel faders move.
You can use this procedure to adjust any parameter – e.g. EQ
gain, input gain, etc.
To Next Page
Loading...
