Chapter 8: Utilities & Preferences
Linking
418/ 526 2.0 Eclipse User Guide
Fast Link Mode (GANG)
This mode can be used to create a temporary link group in
order to update a parameter across several channels on the fly.
For example, to apply an EQ setting across a range of
channels; link the channels using Fast Link mode; adjust the
EQ parameters on any of the linked channels, then exit Fast
Link to dissolve the group.
Using Fast Link mode can be faster than copying parameters
via the Copy/Paste function.
Fast Link mode is similar to normal Link groups but has some
important differences:
• There is only one Fast Link group – you cannot create
multiple groups. Use Channel Links whenever you need
multiple groups.
• The Fast Link group links all channel parameters.
• The Fast Link group is cancelled once you exit Fast Link
mode.
• All other Channel Links are disabled while Fast Link
mode is active.
• You cannot link input and output channels together.
To Next Page
Loading...
