Chapter 10: M.A.R.S.
Advanced Functions
Eclipse User Guide 2.0 479/ 526
Timecode Options
Referencing to LTC or MTC
From the Project Settings window within M.A.R.S., you can select
whether recordings are referenced to:
• Int. – internal timecode (default)
• LTCi – Linear timecode from an Ethersound channel.
• MTC1 – MIDI timecode from the MIDI input on the rear of
the console.
To reference to LTC, you must choose the LTC input channel.
To use MIDI timecode, the MIDI interface card must be enabled.
Both options are set from the System Settings on M.A.R.S.:
1. Select Sys Set from the top of the M.A.R.S. display (1):
To Next Page
Loading...
