Chapter 2: Installation
System Connections
Eclipse User Guide 2.0 49/ 526
Wordclock Out
On the rear of the console, and on the DioCore, you will also
find a Wc Out (BNC) connection. This will automatically follow
the system clock, as selected above, and can be used to
distribute sync to external devices.
Sync from DIO
This is a clock extracted from the Dio device which is installed
in the DSP Dio slot. If the console is not the primary master
(e.g. it is the first in a network of several consoles or DioCores),
you will need to synchronise the console to the Ethersound
clock generated by the primary master. Connect this BNC to the
WC IN of the MCoptical card to achieve the desired result.
To Next Page
Loading...
