CHAPTER 10
Connecting the PTX5000 Packet
Transport Switch to External Devices
•
Tools and Parts Required to Connect the PTX5000 Packet Transport Switch to External
Devices on page 85
•
Connecting the PTX5000 Packet Transport Switch to a Management Console or
Auxiliary Device on page 86
•
Connecting the PTX5000 Packet Transport Switch to an External Alarm-Reporting
Device on page 87
•
Connecting PIC Cables to the PTX5000 Packet Transport Switch on page 87
•
Connecting the PTX5000 Packet Transport Switch to a Management Ethernet
Device on page 90
•
Connecting the PTX5000 Packet Transport Switch to an External Clocking
Device on page 91
Tools and Parts Required to Connect the PTX5000 Packet Transport Switch to External
Devices
To connect the packet transport switch to external devices, you need the following tools
and parts:
•
2.5-mm flat-blade (–) screwdriver for the alarm relay contacts
•
Electrostatic discharge (ESD) grounding wrist strap (provided in the accessory kit)
Related
Documentation
Verifying the PTX5000 Packet Transport Switch Parts Received on page 63•
• Connecting the PTX5000 Packet Transport Switch to an External Alarm-Reporting
Device on page 87
85Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
