Juniper PTX Series - Fire Safety Requirements for Juniper Networks Devices; Figure 84: ESD Points on the Packet Transport Switch; Figure 85: Placing a Component into an Electrostatic Bag

Figure 84: ESD Points on the Packet Transport Switch
g006190
ESD
point
Figure 85: Placing a Component into an Electrostatic Bag
Fire Safety Requirements for Juniper Networks Devices
•
General Fire Safety Requirements on page 224
•
Fire Suppression on page 224
•
Fire Suppression Equipment on page 224
223Copyright © 2012, Juniper Networks, Inc.
Appendix A: PTX5000 Safety and Regulatory Compliance Information