Juniper PTX Series - Installation Safety Warnings for Juniper Networks Devices; Installation Instructions Warning; Rack-Mounting Requirements and Warnings

Installation Safety Warnings for Juniper Networks Devices
Observe the following warnings before and during hardware equipment installation:
•
Installation Instructions Warning on page 226
•
Rack-Mounting Requirements and Warnings on page 226
•
Ramp Warning on page 230
Installation Instructions Warning
WARNING: Read the installation instructions beforeyou connectthe hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingenvoordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeetennen järjestelmänyhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur lasource d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazioneprima di collegareil sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Rack-Mounting Requirements and Warnings
Ensure that the equipment rack into which the chassis is installed is evenly and securely
supported, to avoid the hazardous condition that could result from uneven mechanical
loading.
WARNING: To prevent bodily injury when mounting or servicing the chassis
in a rack, take the following precautions to ensure that the system remains
stable. The following directives help maintain your safety:
Copyright © 2012, Juniper Networks, Inc.226
PTX5000 Packet Transport Switch Hardware Guide