user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot offline
For more information about the command, see the Junos OS System Basics and
Services Command Reference.
3. Unplug the cable from the cable connector port. Immediately cover each fiber-optic
transceiver and the end of each fiber-optic cable with a rubber safety cap.
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
CAUTION: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing cable. The safety cap keeps the port clean and
prevents accidental exposure to laser light.
4. Remove the cable from the cable management system and detach it from the
destination port.
Installing a PTX5000 PIC Cable
To install a PIC cable (see Figure 63 on page 184):
1. Have ready a length of the type of cable used by the PIC. For cable specifications, see
the PTX5000 Packet Transport Switch PIC Guide.
2. Remove the rubber safety plug from the PIC cable connector port.
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
CAUTION: Do not leave a fiber-optic transceiver uncovered except when
inserting or removing cable. The safety cap keeps the port clean and
prevents accidental exposure to laser light.
3. Insert the cable connector into the cable connector port on the PIC faceplate.
4. Arrange the cable in the cable management system, to prevent it from dislodging or
developing stress points. Secure the cable so that it is not supporting its own weight
as it hangs to the floor. Place excess cable out of the way in a neatly coiled loop in
the cable management system. Placing fasteners on the loop helps to maintain its
shape.
Copyright © 2012, Juniper Networks, Inc.182
PTX5000 Packet Transport Switch Hardware Guide
To Next Page
Loading...
