Juniper PTX Series - Figure 62: Connecting Fiber-Optic Cable to a PIC; Replacing a PTX5000 PIC

You can also verify correct FPC and PIC functioning by issuing the show chassis fpc and
show chassis fpc pic-status commands, as described in “Maintaining the PTX5000 FPCs”
on page 111.
Figure 62: Connecting Fiber-Optic Cable to a PIC
g006197
1
0
1
0
1
0
Related
Documentation
PTX5000 FPC Description on page 32•
• PTX5000 FPC LEDs on page 34
• Troubleshooting the PTX5000 FPCs on page 136
• Preventing Electrostatic Discharge Damage to a PTX5000 Packet Transport Switch
on page 222
Replacing a PTX5000 PIC
1.
Removing a PTX5000 PIC on page 179
2.
Installing a PTX5000 PIC on page 180
Copyright © 2012, Juniper Networks, Inc.178
PTX5000 Packet Transport Switch Hardware Guide