Juniper PTX Series - PTX5000 Craft Interface Overview; Table 7: Control Board Port Leds

Table 6: Control Board LEDs (continued)
DescriptionStateColorLabel
Control board has failed.On steadilyYellowFAIL
No faults have been detected on the control board.Off–
Control board is online and is functioning normally.On steadilyGreenOK
Control board is offline.Off–
Table 7: Control Board Port LEDs
DescriptionStateColorLabelPort
1-Gbps connection.On steadilyGreenY=10/100
G=1000
HOST/ETHERNET
10/100-Mbps connection.On steadilyYellow
Control board is offline.Off–
Traffic is passing through the port.On steadilyGreenACT
No traffic is passing through the port.Off–
NOTE: These ports are reserved for future use.–GreenLINK(X)GE0
through
(X)GE3
NOTE: These ports are reserved for future use.–GreenACT
NOTE: This port is reserved for future use.–GreenLINKGE4
NOTE: This port is reserved for future use.–GreenACT
Related
Documentation
PTX5000 Control Board Description on page 22•
• Maintaining the PTX5000 Control Boards on page 109
• Troubleshooting the PTX5000 Control Boards on page 135
• Troubleshooting the PTX5000 Host Subsystem on page 138
PTX5000 Craft Interface Overview
•
PTX5000 Craft Interface Description on page 26
•
PTX5000 Craft Interface LEDs on page 28
25Copyright © 2012, Juniper Networks, Inc.
Chapter 3: PTX5000 Hardware Components Overview