Compliance Statements for EMC Requirements for Juniper Networks Devices (Japan)
Translation from Japanese—This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be required to take
adequate measures. VCCI-A
Related
Documentation
Compliance Statements for EMC Requirements for Juniper Networks Devices (Canada)
on page 250
•
• Compliance Statements for EMC Requirements for Juniper Networks Devices (United
States) on page 253
Compliance Statements for EMC Requirements for Juniper Networks Devices (United States)
The hardware equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Related
Documentation
• Site Electrical Wiring Guidelines for Juniper Networks Devices on page 245
• General Safety Guidelines for Juniper Networks Devices on page 219
• General Safety Warnings for Juniper Networks Devices on page 220
Compliance Statements for Environmental Requirements for Juniper Networks Devices
Batteries in this product are not based on mercury, lead, or cadmium substances. The
batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC,
and 98/101/EEC. The product documentation includes instructional information about
the proper method of reclamation and recycling.
Related
Documentation
General Safety Guidelines for Juniper Networks Devices on page 219•
• General Safety Warnings for Juniper Networks Devices on page 220
PTX5000 Compliance Statements for Acoustic Noise
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel
beträgt 70dB(A) oder weniger gemäss EN ISO 7779
Translation:
253Copyright © 2012, Juniper Networks, Inc.
Appendix A: PTX5000 Safety and Regulatory Compliance Information