•
IP address of a DNS server
•
Password for the root user
Entering Configuration Mode
1. Verify that the network device is powered on.
2. Log in as the root user. There is no password.
Amnesiac <ttyd0>
login: root
3. Start the CLI.
root@% cli
root>
4. Enter configuration mode.
root> configure
Entering configuration mode.
[edit]
root#
Configuring User Accounts and Passwords
For information about using an encrypted password or an SSH public key string (DSA or
RSA), see the Junos OS System Basics Configuration Guide.
1. Add a password to the root administration user account. Enter a clear-text password.
[edit]
root# set system root-authentication plain-text-password
New password: password
Retype new password: password
2. Create a management console user account.
[edit]
root# set system login user user-name authentication plain-text-password
New Password: password
Retype new password: password
3. Set the user account class to super-user.
[edit]
root@# set system login user user-name class super-user
Configuring System Attributes
1. Configure the name of the packet transport switch. If the name includes spaces,
enclose the name in quotation marks (“ ”).
[edit]
root@# set system host-name host-name
Copyright © 2012, Juniper Networks, Inc.102
PTX5000 Packet Transport Switch Hardware Guide
To Next Page
Loading...
