CCG0 show the status of the CCG in slot CCG0. Table 11 on page 31 describes the functions
of the CCG LEDs.
Table 11: PTX5000 CCG LEDs
DescriptionStateColorLabel
CCG is functioning as the master.On steadilyGreenMASTER
CCG is offline or functioning as the backup.Off–
CCG is online and is functioning normally.On steadilyGreenOK
CCG is offline or absent.Off–
CCG has failed.On steadilyRedFAIL
No failure has been detected.Off–
A PSM status LED—labeled 0 through 3—for each power supply module is located on
the craft interface below the PDU LEDs.
Table 12: Power Supply Module LEDs on the Craft Interface
DescriptionStateColor
The PSM is functioning normally.On steadilyGreen
The PSM has failed.On steadilyRed
The PSM is offline or absent.Off–
Fan Trays LEDs
One status LED—labeled 0 through 2— for each fan tray is located to the right of the host
subsystem LEDs on the craft interface.
Table 13: Fan Tray LEDs on the Craft Interface
DescriptionStateColor
The fan tray is functioning normally.On steadilyGreen
The fan tray has failed.On steadilyRed
The fan tray is offline or absent.Off–
Related
Documentation
PTX5000 Craft Interface Description on page 26•
31Copyright © 2012, Juniper Networks, Inc.
Chapter 3: PTX5000 Hardware Components Overview
To Next Page
Loading...
