CHAPTER 6
Unpacking the PTX5000 Packet
Transport Switch
•
Overview of Unpacking the PTX5000 Packet Transport Switch on page 61
•
Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch on page 61
•
Unpacking the PTX5000 Packet Transport Switch on page 62
•
Verifying the PTX5000 Packet Transport Switch Parts Received on page 63
Overview of Unpacking the PTX5000 Packet Transport Switch
To unpack the packet transport switch:
1. Gather the tools required to unpack the packet transport switch.
See “Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch”
on page 61.
2. Remove the packet transport switch, accessory box, tool kit, and all parts from the
shipping crate.
See “Unpacking the PTX5000 Packet Transport Switch” on page 62.
3. Verify that all parts have been received.
See “Verifying the PTX5000 Packet Transport Switch Parts Received” on page 63.
Related
Documentation
Overview of Installing the PTX5000 Packet Transport Switch on page 53•
Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch
To unpack the packet transport switch and prepare for installation, you need the following
tools:
•
Phillips (+) screwdriver, number 2
•
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
•
Blank panels to cover any slots not occupied by a component
61Copyright © 2012, Juniper Networks, Inc.
To Next Page
Loading...
