The packet transport switch supports the FPC, as shown in Figure 19 on page 34.
Figure 19: FPC Supported by the Packet Transport Switch
Related
Documentation
PTX5000 FPCs Supported on page 35•
• PTX5000 FPC LEDs on page 34
• PTX Series PIC Description on page 36
• Maintaining the PTX5000 FPCs on page 111
• Troubleshooting the PTX5000 FPCs on page 136
PTX5000 FPC LEDs
Each FPC has two LEDs—labeled FAULT and OK.Table 14 on page 34 describes the
functions of the FPC LEDs.
Table 14: PTX5000 FPC LEDs
DescriptionStateColorLabel
FPC is online and is functioning normally.On steadilyGreenOK
FPC is booting up.Blinking
Copyright © 2012, Juniper Networks, Inc.34
PTX5000 Packet Transport Switch Hardware Guide