Juniper PTX Series - Maintaining Packet Transport Switch Hardware Components; Components

CHAPTER 13
Maintaining Packet Transport Switch
Hardware Components
•
Tools and Parts Required to Maintain the PTX5000 Packet Transport Switch
Components on page 107
•
Routine Maintenance Procedures for the PTX5000 Packet Transport Switch on page 108
•
Maintaining the PTX5000 Centralized Clock Generators on page 108
•
Maintaining the PTX5000 Control Boards on page 109
•
Maintaining PTX5000 Cooling System Components on page 109
•
Maintaining the PTX5000 FPCs on page 111
•
Maintaining the PTX5000 Host Subsystem on page 111
•
Maintaining the PTX5000 PICs on page 112
•
Maintaining the PTX5000 PIC Cables on page 112
•
Maintaining the PTX5000 Power System on page 113
•
Maintaining the PTX5000 Routing Engines on page 114
•
Maintaining the PTX5000 Switch Interface Boards on page 114
Tools and Parts Required to Maintain the PTX5000 Packet Transport Switch
Components
To maintain the hardware components, you need the following tools and parts:
•
ESD grounding wrist strap
•
Flat-blade (–) screwdriver
•
Phillips (+) screwdriver, number 1
•
Phillips (+) screwdriver, number 2
Related
Documentation
Routine Maintenance Procedures for the PTX5000 Packet Transport Switch on page 108•
• Maintaining the PTX5000 Centralized Clock Generators on page 108
• Maintaining the PTX5000 Control Boards on page 109
• Maintaining the PTX5000 Air Filters on page 109
107Copyright © 2012, Juniper Networks, Inc.