Juniper PTX Series - About the Documentation; Junos os Documentation and Release Notes; Objectives

About the Documentation
•
Junos OS Documentation and Release Notes on page xxi
•
Objectives on page xxi
•
Audience on page xxii
•
Documentation Conventions on page xxii
•
Documentation Feedback on page xxiii
•
Requesting Technical Support on page xxiv
Junos OS Documentation and Release Notes
For a list of related Junos OS documentation, see
http://www.juniper.net/techpubs/software/junos/ .
If the information in the latest release notes differs from the information in the
documentation, follow the Junos OS Release Notes.
To obtain the most current version of all Juniper Networks
®
technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/ .
Objectives
This documentation describes hardware components, installation, basic configuration,
and basic troubleshooting procedures for the Juniper Networks PTX5000 Packet
Transport Switch. It explains how to prepare your site for hardware installation, unpack
and install the hardware, power on the hardware platform, perform initial software
configuration, and perform routine maintenance. After completing the installation and
basic configuration procedures covered in this documentation, see the Junos OS
configuration guides for information about further Junos OS configuration.
NOTE: For additional information about Juniper Networks routers and the
Physical Interface Cards (PICs) they support—either corrections to or
information that might havebeen omitted from this guide—see the hardware
release notes at http://www.juniper.net/.
xxiCopyright © 2012, Juniper Networks, Inc.