Juniper PTX Series Hardware Guide

See Table 25 on page 64.
3. If any part is missing, contact a customer service representative.
Table 24: Packet Transport Switch Parts List
QuantityComponent
1Chassis, including midplane and craft interface
Up to 8FPCs
Up to 2 for each FPCPICs
9SIBs
1 or 2Routing Engines
1 or 2 (one for each Routing Engine)Control boards
1 or 2Centralized clock generators (CCGs)
1 or 2Power distribution unit (PDU)
Up to 8Power supply modules (PSMs)
2Horizontal fan trays
1Vertical fan tray
1Quick start installation
1Open-frame mounting shelf
1Four-post mounting shelf
1Rear support bracket—Required only for
mounting a four-post rack or cabinet
One blank panel for each slot not occupied by a
component
Blank panels for slots without components
installed
Table 25: Accessory Box Parts List
QuantityPart
42Screws to mount chassis, Phillips, 12-24 x 1/2
in. , self-tapping
3Split washers for the grounding cable
Copyright © 2012, Juniper Networks, Inc.64
PTX5000 Packet Transport Switch Hardware Guide

Juniper PTX Series Specifications

General

Product Series	PTX Series
Operating System	Junos OS
Port Density	High-density
Forwarding Performance	Billions of packets per second
Use Case	Service provider core, peering, and transit networks; data center interconnect (DCI)
Power Supply	Redundant, hot-swappable power supplies
Dimensions	Varies by model
Weight	Varies by model