Juniper PTX Series Hardware Guide

APPENDIX B
Packet Transport Switch Physical
Specifications
•
PTX5000 Physical Specifications on page 255
PTX5000 Physical Specifications
Table 43 on page 255 lists the packet transport switch's physical specifications.
Table 43: Physical Specifications
ValueDescription
62.5 in. (158.8 cm) high
17.4 in. (44.3 cm) wide
33.2 in. (84.3 cm) deep
Total depth 37 in. (940 mm)
NOTE: The cable management system adds 3.8 in. (9.7 cm)
depth to the front of the chassis.
Chassis dimensions
Chassis with midplane and air filters only: 331.6 lb (150.7 kg)
Minimum configuration: 645 lb (293.2 kg)
Maximum configuration: 964 lb (438.2 kg)
Packet transport switch weight
2.8 lb (1.3 kg)Control board weight
10.1 lb (4.6 kg)Routing Engine weight
4 lb (1.8 kg)Craft interface weight
FPCs with PICs installed: Up to 30 lb (13.6 kg)
FPC without PICs installed: up to 25 lb (11.4 kg)
Blank panel in FPC slot: 6.9 lb (3.1 kg)
FPC weight
5 lb (2.3 kg)PIC weight
255Copyright © 2012, Juniper Networks, Inc.

Juniper PTX Series Specifications

General

Product Series	PTX Series
Operating System	Junos OS
Port Density	High-density
Forwarding Performance	Billions of packets per second
Use Case	Service provider core, peering, and transit networks; data center interconnect (DCI)
Power Supply	Redundant, hot-swappable power supplies
Dimensions	Varies by model
Weight	Varies by model