Juniper PTX Series - Page 118

Configured sources
Source Priority Deviation Last deviation Status
(in ppm) (in ppm)
bits-a secondary -0.01 -0.01 qualified
gps-0-10mhz primary -0.01 -0.01 in-use
Clock Synchronization Status :
Clock module on CCG 1
Current state : Online - Standby
Validation interval : 103 seconds
Signal type : t1
Switching mode : non-revertive
Line termination : no-y-cable
Transmitter : disabled
Current clock state : locked to master CCG
Selected for : 10 seconds
Selected since : 2011-09-26 17:04:24 PDT
Configured sources
Source Priority Deviation Last deviation Status
(in ppm) (in ppm)
bits-a secondary +0.05 +0.05 qualified
gps-0-10mhz primary unknown unknown unknown
Related
Documentation
• PTX5000 Centralized Clock Generator Description on page 16
Copyright © 2012, Juniper Networks, Inc.92
PTX5000 Packet Transport Switch Hardware Guide