authentication-method (password | public-key);
}
name-server {
address;
}
}
interfaces {
em0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
2. Commit the configuration to activate it.
[edit]
root@# commit
3. Optionally, configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them.
[edit]
root@host# commit
4. When you have finished the configuration, exit configuration mode.
[edit]
root@host# exit
root@host>
Copyright © 2012, Juniper Networks, Inc.104
PTX5000 Packet Transport Switch Hardware Guide
To Next Page
Loading...
