Juniper PTX Series - Page 150

Num Fans Missing 0
Num Fans Failed 0
Fan Duty Cycle 0
ZONE 1 Status
Driving FRU FPC 5 TL1
Temperature 66 degrees C / 150 degrees F
Condition OK
Num Fans Missing 0
Num Fans Failed 0
Fan Duty Cycle 0
7. Use the show chassis zones detail command to verify the status of each component
in cooling zone 0 and cooling zone 1.
user@host> show chassis zones detail
ZONE 0 Status
Item Status Measurement
CB 0 OK
CB 1 OK
Routing Engine 0 OK
Routing Engine 1 OK
SIB 0 OK
SIB 1 OK
SIB 2 OK
SIB 3 OK
SIB 4 OK
SIB 5 OK
SIB 6 OK
SIB 7 OK
SIB 8 OK
Fan Tray 0 OK Spinning at 35% fan tray
speed
ZONE 1 Status
Item Status Measurement
FPC 0 OK
PIC 0/0 Absent
PIC 0/1 Absent
FPC 1 OK
PIC 1/0 Absent
PIC 1/1 Absent
FPC 2 OK
PIC 2/0 OK
PIC 2/1 OK
FPC 3 Absent
FPC 4 Absent
FPC 5 OK
PIC 5/0 OK
PIC 5/1 OK
FPC 6 OK
PIC 6/0 Absent
PIC 6/1 Absent
FPC 7 OK
PIC 7/0 OK
PIC 7/1 OK
Fan Tray 1 OK Spinning at 31% fan tray
speed
Copyright © 2012, Juniper Networks, Inc.124
PTX5000 Packet Transport Switch Hardware Guide