Keysight Technologies B2961A Command Reference

2- 2 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
This chapter lists all of the SCPI subsystem commands for Keysight B2961A/
B2962A and provides the summary information of the command.
• “Setting Source Output and Measurement”
“SOURce Subsystem,” for source setup
“SENSe Subsystem,” for measurement setup
“OUTPut Subsystem,” for using source output functions
“Source Output Ranges”
“Measurement Ranges”
• “Controlling Source/Measure Trigger”
“TRIGger Subsystem,” for triggering source output and measurement
“LXI Subsystem,” for using LXI trigger event functions
• “Reading Source/Measure Data”
“FETCh Subsystem,” only for reading data
“FORMat Subsystem,” for data output format
“READ Subsystem,” for performing measurements
“MEASure Subsystem,” for a spot measurement
“CALCulate Subsystem,” for using math functions
“TRACe Subsystem,” for using trace buffer
• “Using Advanced Functions”
“HCOPy Subsystem,” for getting screen dump
“DISPlay Subsystem,” for front panel display setup
“MMEMory Subsystem,” for managing data memory
“PROGram Subsystem,” for using program memory
“SYSTem Subsystem,” for using system functions
“STATus Subsystem,” for using status system
NOTE In the tables, Reset setting gives the initial setting or the default setting which is set
to the instrument when it is turned on or it receives the *RST command.

Keysight Technologies B2961A Specifications

General

Brand	Keysight Technologies
Model	B2961A
Category	Portable Generator
Language	English