Keysight Technologies B2961A - Page 78

2- 38 Keysight B2961A/B2962A SCPI Command Reference, Edition 6
Subsystem Command Summary
Setting Source Output and Measurement
Figure 2-7 Maximum Voltage and Current
a. Table 2-5 shows the limitations when using Channels 1 and 2 for DC output or Pulsed output
with 50 μs ≤ t ≤ t
max
(=99.9999 ks).
b. Maximum base current is 500 mA for the pulse with 50 μs ≤ t ≤ 1 ms, and 50 ms for the pulse
with 50 μs ≤ t ≤ 2.5 ms or 50 μs ≤ t ≤ 10 ms.
c. Maximum duty cycle is 99.9999 % for the pulse with 50 μs ≤ t ≤ t
max
, and 2.5 % for the pulse
with 50 μs ≤ t ≤ 1 ms, 50 μs ≤ t ≤ 2.5 ms, or 50 μs ≤ t ≤ 10 ms.
6
10.5
10.5
Voltage (V)
Current (A)
6
1.515
-
-
-
1.515
Pulsed output
200
200
-
-
210
210
6
3.03
3.03
Voltage (V)
Current (A)
6
0.105
-
-
-
0.105
DC output
1.515
1.515
-
-
21
21
Duty cycle ~ 2.5 %
Duty cycle ~ 99.9999 %
Pulsed output